HQ:NSC18/Hard/Al BS

Long Scanning, DLC Hardened Lift Mode and Soft Tapping Mode AFM Probe


AFM probes of the HQ:NSC18 series are suitable for soft tapping and Lift mode operation AFM (e.g. EFM and MFM) since they provide high stability in tapping mode as well as high sensitivity to magnetic and electric forces that may be weak. These AFM probes are also used for mapping of materials properties in Force modulation mode and true topography imaging of soft samples in Soft tapping mode.

The HQ AFM probes offer high consistency of the AFM tip radius, the AFM cantilever reflectivity and the quality factor.

A 20 nm wear-resistant DLC coating is applied to the tip side of the AFM cantilever. The coating is chemically inert and more hydrophobic than silicon with a natural oxide layer. The aluminum reflective coating enhances the laser reflectivity of the AFM cantilever by approximately 2.5 times.

Coating

Hard Diamond-Like-Carbon

AFM Probe Specifications
AFM Tip
Shape Height Full Cone Angle Radius
Shape Rotated Height 15 µm (12 - 18 µm)* Full Cone Angle 40° Radius < 20 nm
AFM Cantilever
Cantilever Shape Force Const. Res. Freq. Length Width Thickness
Cantilever Cantilever A Shape Beam Force Const. 2.8 N/m(1.2 - 5.5 N/m)* Res. Freq. 75 kHz(60 - 90 kHz)* Length 225 µm(1 - 230µm)* Width 27.5 µm(24.5 - 30.5µm)* Thickness 3µm(2.5 - 3.5 µm)*

* typical values

Packages Price
HQ:NSC18/Hard/Al BS-15 15 pcs * 495 USD
495 USD
HQ:NSC18/Hard/Al BS-50 50 pcs * 1350 USD
1350 USD
* Total: 0 USD
mix and match box banner ORDER YOUR OWN PERSONALISED BOX WITH DIFFERENT MIKROMASCH AFM PROBES