CSC17/Ti-Pt

ORDERING
Probe
SEM image of uncoated silicon SPM probe tip
Silicon etched probe tip of the CSC series has a conical shape.

Typical probe tip radius of uncoated tip
10 nm

Full tip cone angle*
40°

Total tip height
20..25 µm

Probe material
n-type silicon (phosphorus doped)

Probe bulk resistivity
0.01..0.05 Ohm*cm

*The full cone angle may be less than 40° at the last 200 nm of the tip end.
Cantilever
SEM image of Silicon cantilever and probe. Schematic drawing of the probe chip.
Cantilever Resonant Frequency, kHz Spring Constant, N/m Length
l ± 5,
µm		 Width
w ± 3,
µm		 Thickness
t ± 0.5,
µm
min typ max min typ max
17 Series 8.5 12 15 0.05 0.15 0.3 460 50 2.0
Coating

The Ti-Pt coating consists of a 10-nm Pt layer on a 20-nm Ti sublayer, which increases adhesion and electromigration firmness of Pt. The Ti-Pt coating is formed on both tip and reflective side of the cantilever.

Resulting tip radius with the coating
40.0 nm.

 
15 chips. View price
50 chips. View price
Mix & Match
 
 

 

 

 

 
 
OUR DISTRIBUTORS CONTACTS
MIKROMASCH
TOLL-FREE NUMBERS: USA: 1-866-SPMTIPS (776-8477)/ EU: + 8000-SPMTIPS (776-8477)
E-MAIL: INFO@MIKROMASCH.COM 		RUS